You may need to change the configuration of your Body:

• If you want to use a different Wi-Fi network,
• If you want to switch to a Wi-Fi configuration,
• If you want to switch to a Bluetooth configuration.

iOS

To change your configuration, perform the following steps:

1.  Open the Withings App.
2. Go to Devices.
3. Tap Body.
   
4. Tap Update Wi-Fi Configuration.
   
5. Press the button at the back of the scale and tap Next.
   
6. Tap Next.
   Note: If your Body has already been paired with your mobile device, go to the Settings of your mobile device, select Bluetooth and locate your scale in the list of devices. Select the small icon to the right of the scale and select the option to Forget or Remove the device.
   
7. To install your scale in Wi-Fi, perform the following steps:
   - Tap Quick setup to use the same Wi-Fi network as your mobile device or Setup another network to use another one.
   
   - Tap Allow.
8. To install your scale in Bluetooth, tap I don't have a Wi-Fi network.
   
9. Tap OK.
10. Tap Close.

Android

To change your configuration, perform the following steps:

1.  Open the Withings App.
2. Go to Devices.
3. Tap Body.
   
4. Tap Wi-Fi Configuration.
   
5. Press the button at the back of the scale and tap Next.
   
6. Tap Next.
   Note: If your Body has already been paired with your mobile device, go to the Settings of your mobile device, select Bluetooth and locate your scale in the list of devices. Select the small icon to the right of the scale and select the option to Forget or Remove the device.
   
7. To install your scale in Wi-Fi, perform the following steps:
   - Tap Setup Wi-Fi connection.
   
   - Tap the Wi-Fi network you want to use or tap Manual configuration.
   - Enter the password of the Wi-Fi network.
   - Tap Next.
8. To install your scale in Bluetooth, tap I don't have a Wi-Fi network.
   
9. Tap Done.