• Assigning a measurement from your Thermo
• Assigning an unassigned measurement
• Reassigning a measurement 

Assigning a measurement from your Thermo

To assign a measurement from your Thermo, perform the following steps:

1. As soon as the temperature comes up, slide your finger up or down on the touch sensitive area of the display to select the correct user.
2. Press the button to confirm your choice.
   The fever status LED turns on. Your Thermo will power off after a few seconds. Your measurement is sent to the app after your Thermo turns off.

Assigning an unassigned measurement

If you’ve taken a measurement using your Thermo but didn’t assign it right away, you can do so from the Thermo app. To do so, perform the following steps:

1. Open the Thermo app.
2. Tap Assign to... in the top banner.
   It may take a few seconds for this banner to appear in the app as the app needs to sync with your Thermo first.
   
3. Select the measurement and tap the user profile you want to assign it to.
   

Reassigning a measurement

If you’ve accidentally assigned a temperature measurement to the wrong user profile,
you can correct this anytime you want. To do so, perform the following steps:

1. Open the Thermo app.
2. Tap the name of the person you’ve wrongly assigned the measurement to.
   
3. Tap the measurement you’ve wrongly assigned.
   
4. Tap the assignment icon in the top right corner.
   
5. Tap the user profile you want to assign the measurement to.