choose language

Deutsch Français 日本語 简体中文

You can easily replace the wristband of your Steel HR / Steel HR Sport thanks to the quick release spring bars with which it is attached. The 36-mm model requires wristbands that are 18-mm wide (Steel HR only), while the 40-mm model requires wristbands that are 20-mm wide (Steel HR and Steel HR Sport).

To change the wristband, perform the following steps:

  1. Turn your Steel HR / Steel HR Sport over.
  2. Locate the knob of each spring bar.
  3. Pull the knob of the first spring bar to the left side and remove the wristband.

  4. Insert one side of the spring bar of the new wristband.
  5. Put the wristband in place while pulling the knob to the left side.
  6. Release the knob.
    The wristband is now properly attached to your Steel HR / Steel HR Sport.
  7. Repeat the previous steps for the other side.

Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.