choose language

Deutsch Français 日本語 简体中文

This article will help you if you encounter any of the following issues:

  • Your ScanWatch is in Demo Mode
  • Your ScanWatch cycles through different screens on its own
     


If you encounter any of the issues mentioned above, try to perform a factory reset. To do so, perform the following steps:

  1. Open the Health Mate app and select Devices (the small watch icon on the bottom right-hand side of the app). Select the ScanWatch from the device list, scroll down and then select Dissociate this product.
    scanwatch-dissociate-reset.png
  2. Go to the Settings of your mobile device, select Bluetooth and locate ScanWatch XX in the list of devices. Select the small icon to the right and select the option to Forget the device.
    scanwatch-reset-bluetooth-settings.png
  3. Press and hold the button on the side of the watch for 5 seconds. Depending on how your watch was configured, ECG, SpO2, or Workout mode will start after pressing the button for about one second, but continue pressing until a menu appears on the watch's display.
  4. When on this menu, press the watch button until the screen shows Factory Reset.
  5. While the watch shows Factory Reset, press and hold the watch button for one second and you will see Reset in 5 clicks.
  6. Press the button 5 times and the watch will be reset to factory settings. While this occurs, the word Reset will appear on the watch’s display.
  7. The watch will now restart and show Hello! on its display. Please note that if the watch does not show Hello!, this means that the factory reset was not successful and so it must be performed again.
  8. You can now reconfigure the watch. Click here if you want to install your ScanWatch again.
Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

Note that this community is supported by its members, not the Withings Support Team.

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.