choose language

Deutsch Français 日本語 简体中文

You can ask a watchmaker or use Withings watch-adjustment tools to adjust your wristband. If you want to adjust the wristband on your own, perform the following steps:

  1. Make sure you have the following tools in the box: hammer (1), ribbed block (2), pin push (3).
  2. Adjust the wristband on your wrist to estimate the number of mesh links to be removed.
  3. Position the wristband ribbed block. The arrows inside the wristband should point downward.
  4. Use the pin punch and the hammer to push out the pin that supports the mesh you want to remove.
  5. Remove the second pin. Remove the mesh, repeat if necessary.
  6. Reassemble the wristband by placing one of the pins, then the other (in the opposite direction of the arrows) with the hammer.
Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.