choose language

Deutsch Français 日本語 简体中文

Disclaimer: Due to health regulations and clearances, some ScanWatch features may not be available or may not have clinical validation in your region. Learn more.

 

US users must follow a different installation process to activate the ECG feature. US users have to take and submit a test ECG measurement which will then be reviewed for free by a health professional. Users will be notified afterwards if they are cleared to use the ECG feature beyond the first activation measurement.

To submit your measurement and receive permission to use the ECG feature going forward, please perform the following steps:

 

  1. Tap Activate to perform your first ECG.
    scanwatch-ecg-tutorial.png
    Through the tutorial, you will also be presented with indications for use. You will also need to provide information about your state of residence to continue.
  2. Read the information about the ECG feature carefully.
    scanwatch-ecg-presentation.png
  3. Fill in your state of residence.
    scanwatch-state-location.png
    Note
    : this information will help Withings comply with each state’s regulations.
  4. As Withings is working with our dedicated partner Heartbeat Health to enable ECG use on ScanWatch, you will need to give them permission to retrieve and analyze your first ECG data.scanwatch-condition-agreement.png
  5. Depending on the state you live in, you will also be asked to fill in a telephone number in order for our partner Heartbeat Health to contact you if needed. Your phone number will be used for authentication later in the process and in the case you would like a physician to contact you regarding the ECG feature. This is required for Withings to ensure compliance with Rx regulations.
    scanwatch-heartbeat-health.png
  6. You are now ready to take your first measurement!
    Simply follow the tutorial on the screen.
    scanwatch-lets-ecg.png
  7. Once the ECG is complete, the data is sent off to Heartbeat Health where they will review your data and enable access to the ECG feature.
    scanwatch-contact-partner.png
  8. You’re all set!

Note: if you come across the following screen during the process, take a screenshot and save it for us. Reach out to our support team by clicking the Contact Us button at the bottom of the page.


scanwatch-support.png

 



Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.