Setting and Enabling Alarms

In order to enable and set alarms, perform the following steps:

1. Open the Withings App.
2. Tap your Devices in the upper right.
3. Find your device and scroll down to "Device Features".
4. Tap Set Upcoming Alarm.
5. Place your watch close enough to your mobile device.
6. Tap and slide the wake-up time up or down to select the alarm time.
7. If necessary, select a Smart Wake-up time when setting an alarm.
   ScanWatch Light will then find the best moment to wake you up during that time period to make for a smoother wake-up experience.
8. Tap the check icon.
9. Tap Repeat on if you want to select on which days the alarm should be triggered.
10. Tap the back button to confirm.

Note: You can set up to 10 alarms on your watch.

Disabling Alarms

To disable an alarm, perform the following steps:

1. Open the Withings App.
2. Tap your Devices in the upper right.
3. Find your device and scroll down to "Device Features".
4. Tap Set Upcoming Alarm.
5. Place your watch close enough to your mobile device.
6. Tap the Alarm toggle to disable the alarm.
7. Tap the back arrow at the top left of the screen.
   Your alarm is disabled.

Stopping an alarm

By default, the alarm will vibrate 12 times before stopping on it is own. You can stop the alarm early by doing a short press of the watch button.

Snooze feature

To snooze your alarm, perform a long press on the button to postpone the alarm for 10 minutes. 

Note: The vibration intensity for alarms is preset and cannot be adjusted, modified, or increased within the watch or Withings App settings.