jonnoandrews
- Total activity 35
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 2
- Subscriptions 6
Activity overview
Latest activity by jonnoandrews-
jonnoandrews commented,
1.5 mm sits very slightly proud of the bezel. With the internal gasket it falls out 1mm sits slightly below the bezel with the internal gasket it falls out and the fingers touch the glass causing...
-
jonnoandrews commented,
Contact support with your proof of purchase. Where did you buy it?
-
jonnoandrews commented,
Really glad it's worked for you guys. Yes 34 mm double domed sapphire. I did remove the gasket by accident scraping out the glass. Mine was black. Also watch expansion and contraction can cause the...
-
jonnoandrews commented,
As far s I know the glass is exactly 34mm on both watches, it's the bezel that's larger. The suggestion for 33.5 is to allow glue in the recess for water resistance. I'm currently using a 34mm sa...
-
jonnoandrews commented,
https://support.withings.com/hc/en-us/community/posts/360030643014-Glass-smashed
-
jonnoandrews commented,
It's still available Yell, where are you? It's not sapphire it's mineral but is fine and is the same as the one in the last pic, email me if in UK
-
jonnoandrews commented,
AFAIK the glass is the same size Here's the 34 in situ, no need for glue
-
jonnoandrews commented,
A little update here, I have found that the 34mm 1 or 1.5mm sapphire OR mineral glass fits fine and for me, water resistance is OK too, also no need for glue. (maybe a tiny bit) To answer your que...
-
jonnoandrews commented,
And I've now found a 34mm will fit with force, however, expansion and contraction may cause problems.
-
jonnoandrews commented,
You might wish to use T-7000 (black) glue instead