• Plugging in your Connected Alarm Clock
• Installing your Connected Alarm Clock with no existing account
• Installing your Connected Alarm Clock with an existing account
• Installing your Sleep Sensor
• Installing your Sleep Sensor on a separate account

Plugging In Your Connected Alarm Clock

1. Place your Withings Aura™ on a nightstand near your bed, so that your face is in the light halo of the product when you are asleep.
   It should be about one meter (39 inches) away from your head.
2. Select the correct plug adapter from the travel adapter plug set.
3. Locate the top side of the plug adapter (labeled “TOP” on the adapter).
4. Locate the top side of the AC power supply (labeled “TOP” on the power supply).
5. Insert the tab located on the top side of the plug adapter in the notch located on the top side of the AC power supply.
6. Push the plug adapter until you hear a click.
   Make sure the adapter is properly inserted. If not, pull the button to disengage it and try inserting it again.
7. Connect the power supply cable to your Connected Alarm Clock.
8. Plug the power supply cable to an outlet.
   A solid dot appears on the display of your Connected Alarm Clock. After a minute or so, the time is displayed (00:00 by default).

Installing your Connected Alarm Clock with no existing account

If you don’t already have a Withings account, you have to create one in order to set up and use your Connected Alarm Clock. To do so, perform the following steps:

1. Open the Withings App.
2. Tap Get started.
   
3. Tap Setup my device.
   
   
4. Tap Aura.
   
   
5. Tap Install now.
   
6. Tap Next.
   
7. Tap the Connected Alarm Clock you want to install. If your Connected Alarm Clock is not displayed in the list, go to the Bluetooth settings
   of your device and pair it from there. It should now appear in the Withings App.
8. Tap Pair to pair your Connected Alarm Clock with your device.
9. Tap Next.
   
10. Enter your email address, password, and then confirm your password. Tap Next.
11. Enter your first name, surname, gender and birthday. Tap Next.
12. Enter your current height and weight. Tap Create.
13. Tap the Wi-Fi network you want to use or tap Manual configuration.
14. Enter the password of the Wi-Fi network.
15. Tap Next.
16. Tap No yet if you’re only installing the Connected Alarm Clock.
    
17. Refer to Installing your Sleep Sensor if you also want to install a Sleep Sensor.
18. Tap Done.
19. A tutorial on how to use your Connected Alarm Clock will be displayed.

Installing your Connected Alarm Clock with an existing account

Once you’ve logged in to the Withings App, you can get started on the installation process. To do so, perform the following steps:

1. Go to My devices in the Withings App.
2. Tap +.
   
3. Tap Aura.
   
4. Tap Install now.
   
5. Tap Next.
   
6. Tap the Connected Alarm Clock you want to install. If your Connected Alarm Clock is not displayed in the list, go to the Bluetooth settings of your device and pair it from there. It should now appear in the Withings App.
7. Tap Pair to pair your Connected Alarm Clock with your device.
8. Tap Next.
   
9. Tap the Wi-Fi network you want to use or tap Manual configuration.
10. Enter the password of the Wi-Fi network.
11. Tap Next.
12. Tap No yet if you’re only installing the Connected Alarm Clock.
    
13. Refer to Installing your Sleep Sensor if you also want to install a Sleep Sensor.
14. Tap Done.
    
15. A tutorial on how to use your Connected Alarm Clock will be displayed.

Setting Up the Sleep Sensor

Provided that you already have a Connected Alarm Clock, up to two Sleep Sensors can be installed. They allow you to benefit from additional features, such as sleep tracking, resting heart rate monitoring, and Smart Wake-Up.

You absolutely need a Connected Alarm Clock to be able to set up a Sleep Sensor.

There are three scenarios possible when installing a Sleep Sensor:

• You want to install it at the same time as you install your Connected Alarm Clock
• You want to install it later on
• You want to install a second sensor, on a separate account

Installing your Sleep Sensor at the same time as your Connected Alarm Clock

After performing steps 1 to 8 of Installing your Connected Alarm Clock, perform the following steps:

1. Tap Yes.
   
2. Place the sensor under your mattress at the level of your chest.
   You also have the option of placing the sensor between the mattress and the mattress topper or mattress pad.
   Make sure you completely unroll the sensor, and that the Withings™ label is facing up.
   If you sleep alone in a double bed, make sure you place the sensor in the middle of the bed.
3. Tap Next.
4. Connect the sensor to one of the two USB ports to the left of the power connection on the back of the Connected Alarm Clock.
5. Tap the sensor in the Withings App™ app and tap the user you want to assign.
6. This step is only necessary if you have several users on your Withings account.
7. If you want to install a second sensor, repeat steps 2 to 5.
   If you want to install the second sensor on another account, refer to Installing your Sleep Sensor on a separate account.
8. Tap Done.
9. The calibration of your sensor will start. This step can last up to 10 minutes during which a LED will light up you will hear a buzzing sound. Do not sit on the bed while the LED is on. It will automatically switch off when you can start using the sensor.
   

Installing your Sleep Sensor later on

You can also install your Sleep Sensor at a later stage, for example, if you don’t purchase it at the same time as your Connected Alarm Clock. To do so, perform the following steps:

1. Go to My devices.
2. Tap Aura Connected Alarm Clock.
   
3. Tap Install a new Aura sleep sensor.
   
4. Tap Install now.
   
5. Tap Next.
   
6. Tap Next.
   
7. Place the sensor under your mattress at the level of your chest.
   You also have the option of placing the sensor between the mattress and the mattress topper or mattress pad.
   Make sure you completely unroll the sensor, and that the Withings™ label is facing up.
   If you sleep alone in a double bed, make sure you place the sensor in the middle of the bed.
8. Tap Next.
9. Connect the sensor to one of the two USB ports to the left of the power connection on the back of the Connected Alarm Clock.
10. Tap the sensor in the Withings App and tap the user you want to assign.
    This step is only necessary if you have several users on your Withings account.
11. If you want to install a second sensor, repeat steps 5 to 8.
    If you want to install the second sensor on another account, refer to Installing your Sleep Sensor on a separate account.
12. Tap Done.
13. The calibration of your sensor will start. This step can last up to 10 minutes during which a LED will light up you will hear a buzzing sound. Do not sit on the bed while the LED is on. It will automatically switch off when you can start using the sensor.

Installing your Sleep Sensor on a separate account

If you have two Sleep Sensors, you can either install both of them on the same Withings account or install them on separate accounts. To install the second sensor on another account, perform the following steps:

1. Log in to the Withings App as the user of the second sensor.
2. Install your Connected Alarm Clock on this account.
   Refer to Installing your Connected Alarm Clock for more information.
3. Install your Sleep Sensor.
   Refer to Installing your Sleep Sensor at the same time as your Connected Alarm Clock for more information.