To charge the U-Scan, follow these steps:

1. Unplug the cap from the USB-C port on the side of the Station.
2. Plug the Station into a power source. 
3. Insert the U-Scan by: 
   
   - threading the toilet clip through the top of the Station cover, making sure that the arms of the cover cradle the top of the U-Scan's body.
   
   - aligning the U-Scan's shell side with the shell icon on the Station.
   
   
4. The Station's status light (LED) will turn white to indicate the U-Scan is detected.
5. The U'Scan's status light will turn orange to indicate the U-Scan is charging. You should be able to see the orange light through the top of the Station.
   
6. The status light will turn green once the charging is complete, which can take up to 3.5 hours.

Example of correct alignment for charging	Example of incorrect alignment for charging

Important: When charging with the Station, please make sure that you are using a wall adapter with 5v 1A voltage or above, otherwise the device may not charge correctly or at all.