Features

• Smart Baby Monitor - Monitoring my baby from my computer

  You can monitor your baby from your computer by navigating to the online dashboard and selecting Baby Monitor Live Video.
  
  Note: For Internet Explorer users, the online dashboard is available on IE 11 and newer versions.

• Smart Baby Monitor - Changing the temperature unit in the app

  You can choose to display the temperature in degrees Celsius or degrees Fahrenheit. To do so, perform the following steps:

  1. Open the WithBaby app.
  2. Go to Menu > Baby Monitor > Set Alert Thresholds.
  3. Tap Temperature.
  4. Tap Temperature range.
  5. Select the correct unit and tap OK.

• Smart Baby Monitor - Adjusting the sensitivity thresholds for noise or motion alerts

  You can adjust the sensitivity thresholds by opening the WithBaby app and going to Menu > Set Alert Thresholds. Tap Noise or Motion depending on which threshold you want to adjust.

  You can adjust the amount of notifications you get by adjusting the sensitivity threshold and the duration. Moving the slider to the left or to the right will determine the amount of motion or noise needed, over the duration you've selected, before a notification is sent.

  Once you've received a notification for a specific event (noise or motion), you won't receive any other notification of the same type for the next 5 minutes. This rule has been implemented to avoid being flooded with several notifications for a same event.

• Smart Baby Monitor - Rebooting my Smart Baby Monitor

  There are two ways you can reboot your Smart Baby Monitor:

  Option 1

  1. Unplug the power cable at the rear of the device.
  2. Remove the battery.
  3. Plug the device back.
  4. Put the battery back.

  Option 2

  1. Long press the power button for 3 seconds until the nightlight starts blinking.
  2. Press the power button until the light turns on.