How to Clean the BPM Vision's Cuff

1. Make sure to switch off and unplug the device prior to cleaning.
2. Use a soft cloth wetted with soapy water to clean the cuff first.
3. Then use a soft cloth wetted with clear water to remove residual soap until there is no visible residual contaminants.
4. Do not allow water to get inside the cuff.
5. Use a dry soft cloth to wipe the cuff, in order to remove residual moisture.
6. Dry the cuff in a well-ventilated place after cleaning.

How to disinfect the BPM Vision's Cuff

1. Make sure to switch off and unplug the device prior to disinfection.
2. Use a soft cloth wetted with 70% isopropanol to disinfect the cuff for about 10 minutes.
3. Do not allow water to get inside the cuff.
4. Use a clean dry cloth or towel to wipe off the disinfectant until there is no visible residue.
5. Dry the cuff in a well-ventilated place after disinfection.

How to clean the BPM Vision's Display

1. To clean the monitor simply wipe with a soft and dry lint-free cloth.
2. Do not use an alcohol-based or solvent agent.
3. Do not use water on the monitor.

Note: When used by a single user once per day, it is recommended that the cuff be cleaned once per month.